https://kepek.desktopwallpaperu.xyz/ - Some computer users, whether PCs or laptops, have experienced problems with their device, whether the problem or damage is caused by deliberate or accidental,
in the following I will summarize some of the kinds of damage that often occurs on PCs and their solutions. Here are the things that most often occur damage to the computer and its solutions
The computer won't turn on
In my opinion the incident is usually caused by many factors, and the possibility of the damage can be diagnosed by checking and checking:
Cable connection connected from the power outlet to the power button on the PC
The function of the stabilizer whether the component is functioning properly or not in this case if you use a stabilizer
Power cable that is on the CPU
If the above problems have not been resolved, it is likely that the damage occurred to the Power Supply component or the mainboard.
The computer does not want to boot even though the computer device is on
Usually this problem can be diagnosed by recognizing the beeb sound issued by the computer, following the beeb sign or code and diagnosing the damage,
Beep once, it's a sign that the condition of the computer is good,
Beep marks 1 time long, usually there are problems with memory components
Beep Sign 1 time long and 3 times short, usually there is damage to the VGA card component
Beep Sign 1 time long and 2 times short, usually there is damage to the DRAM parity.
Continuous beeps, this is a sign of damage to the memory module or can also be on video memory
In addition to the above code you can use dianosa software such as sisoft sandra, PC mark04, PC mark05 etc.
The computer can boot but always experiences the "Safe Mode" boot process
We can overcome this problem by restarting our computer again, if it still has not solved the problem of reinstalling the Operating System, and if it still cannot be resolved, there is usually damage to the Hard Disk, you can check the condition of the hard disk by using the scan disk software.
Computers often experience hang
Usually this happens because it is caused by a crash on the software, to overcome you
You can press ctrl + alt + del then select the program that crashed before there is usually a "Not Responding" then you click End task on the program or it can also start the computer. other than that the problem can also be caused by additions that cause conflicts, usually conflicts between hardware are often encountered if you use the Windows operating system,
you can also reinstall your Windows operating system, but you need to remember before you reinstall the Windows operating system you, don't forget to remove your new hardware, after you install you can replace the hardware earlier and do a hardware scant with the "add new" hardware facility that is usually found in the control panel menu.
The computer does not want to recognize the keyboard device
To overcome this problem you can check whether the keyboard you have installed is installed correctly ?, If you have installed it correctly but still the computer is not detecting your keyboard device, the problem might be on your keyboard, you can try to replace the keyboard with another one.
and if there is still no possibility of damage to your computer's port, you can replace using a USB port if your PS2 port doesn't work and vice versa, but if the problem is still not resolved you can also replace or reinstall your Computer Operating System.
There is instability in the Mouse Pointer
This usually happens because the mouse you are using is dirty, clean your mouse, or if you are using an optical mouse this is usually caused by an uneven mouse pad, shake, or it could be that the base you are using has a shiny surface.
Crashes often occur on your computer
This problem is usually caused by many factors, you can check all the position of the harware, cables, and the voltage on the casing, then you can also check the temperature on the CPU and also check Ram, VGA and Processor.
Unknown motherboard manufacturer
You can overcome the problem by opening the case, then you check your CPU, usually on a Mainboard there is a Manufacturer label and specifications and type of the Mainboard, besides that you can also look at the manual book that was included when you just bought the device, keep in mind when you buy the device, don't forget to ask for a manual book at the store where you bought the device.
In addition you can search for data about your computer through the internet, then you match it with the ID that is usually found on your mainboard sticker. To find a list of ID numbers that are usually issued by licensing agencies for electronic devices in America, you can also use diagnostic software such as sandra99 etc.
Forgotten BIOS password
This problem is also often experienced by most people, to overcome this problem you can remove the cmos battray on your CPU, besides that you can also try to guess some default passwords for bios producers - I take the example for AMI and AWARD (example: AMI_SW, AMI , AMI, ALLY, 589589 etc.)
